The date of payment from buyers deliver within days
Company ProfileZhejiang JMT Technology Co., Ltd
By certification [File Integrity]
ZHEJIANG JMT TECHNOLOGY CO.,LTD has specialized in the production of injection moulds for auto parts for more than 15 years. We have a strong design team and modern processing workshops to create high-quality moulds for you in the shortest time!
Model No.: JMT-10221
Shaping Mode: Injection Mould
Surface Finish Process: Polishing
Mould Cavity: Single Cavity
Plastic Material: PP
Process Combination Type: Single-Process Mode
Runner: Hot Runner
Design Software: Pro-E
Supply Ability & Additional Informations
Packaging: Wooden box
Productivity: 500000shots/mold life- 1000000
Place of Origin: China
Supply Ability: 10sets/month
HS Code: 8480790090
Payment Type: L/C,T/T
Delivery Time: 90 Days
Packaging & Delivery
Selling Units: Set/Sets
Package Type: Wooden box
The front and rear bumpers of cars are made of plastic, known as plastic bumpers. The plastic bumper of a car is composed of outer plate, cushioning material and beam. The outer plate and cushioning material are made of plastic, the cross-beam is pressed with cold-rolled sheet to form U-shaped groove, and the outer plate and cushioning material are attached to the cross-beam.
Technical information for Car front bumer and rear bumper mould
1. Design software: Pro-E
2. Mould cavity: single cavity
3. Molding material: PP, ABS, PE
4. Mould cavity and core steel: 1.2738, P20, P20HH, 718H
5. Hot runner system: Synventive, Yudo, HRS, Moldmaster
6. Ejection system: Ejectior pins, angle lifters
7. Leadtime: 90 days
8. Mould life: 500000 shots to 1000000 shots
9. Mould packing: wooden box
Ceeto Service Scope to manufacture car bumper mould
1. Plastic bumper product DFM analysis
2. Moldflow analysis
3. Plastic car bumper mould design
4. Plastic car bumper mould assembly drawing
5. Plastic car bumper mould machining
6. Plastic car bumper mould testing via injection molding machine
7. Plastic car bumper mould packing
8. Plastic car bumper samples packing
9. Mould spare parts preparation
10. We also support you for protogype mould design and manufacture
Plastic Car Front Bumper and rear bumper mould test
Before we ship bumper mould to you, we will have bumper mould buy-off in house together with you, and we must make official at least three mould tryouts and 2000 empty cycle for mould to check if mould function is ok in a certain time.
Normally, you and we attend the validation procedure together and sign off after checking. What we are checking usually are as follows:
1. Compatibility with Injection Machine to be used
2. Is size of the mould ( Leight* width* Height ) correct?
3. Is weight of the mould is correct?
4. Are lifting eyebolts fully seated on the mold and not interfering with mold action?
5. Are all transportation bars installed and in correct color as you request?
6. Are knock-out holes for mechnical ejection and the layout correct as designed?
7. Is electric box wired correctly as per injection machine standard?
8. Are dimensions of locating ring correct?
9. Is radius and orifice diamenter of sprue bush correct?
10. Is clamping features correct?
11. Is the mold construction compatible with robot gripping if applicable to take off part?